Wei Run De Trade (Beijing)Co.Ltd

Showing 1 - 10 of 13, total 2 pages [First] [Previous] [Next] [Last]

vertical check valve
Specification: stander
Detail: Vertical Check Valve Capability Criterion different type model have different specifications Type H42W-25P/25R/40P/40R, H42Y-40 Norminal pressure 2.5 to 4.0 *** Seal tasting 2.8 to4.4 *** She...

cast steel lift check valves
Specification: stander
Detail: cast steel lift check valves Capability Criterion different type model have different specifications Type Swing check valve(GB 12236), Lift check valve(GB12235) Norminal pressure 1.6 to 16.0 *** Seal tasting ...

flange type hard seal butterfly valves
Specification: stander
Detail: Flange type hard Seal Butterfly Valves Capability Criterion different type model have different specifications Nominal Bore 50 to 2000 mm 2 to 80 inch Structural length short 108 to 760 , length 150 to 950 Refer...

hand wafer hard seal butterfly valve
Specification: stander
Detail: Hand Wafer hard Seal butterfly valve Capability Criterion different type model have different specifications Body bonnet Cr.Mo.steel, Cast steel, Stainless steel DN 50 to 150 mm Weight 9 to ...

stainless steel globe valve
Specification: stander
Detail: Capability Criterion different type model have different specifications Type J41W-16P(R)/25P(R)/40P(R)/64P(R) Norminal pressure 1.6 to 6.4 *** Strong tasting 2.4 to 9.6 *** Low testing ...

vacuum insulation globe valve
Specification: stander
Detail: Capability Criterion different type model have different specifications Type NKJ61H-40/64/100, NKJ61Y-40I/64I/100I Norminal pressure 6.0 to 15.0 *** Strong tasting 2.4 to 3.8 *** Seal Test 4.4 ...

stainless steel integral high temperature ball valve
Specification: stander
Detail: Capability Criterion different type model have different specifications Norminal pressure 1.6 to 2.5 CL150 JIS 10K *** Strong tasting 2.4 to 3.8 *** Seal Test 1.8 to 2.8 *** Seat test 0....

l type three-way ball valve
Specification: stander
Detail: Capability Criterion different type model have different specifications Norminal pressure 1.6 to 4.0 CL150 JIS 10K *** Seal Test (water) 1.5 to 4.4 *** Working Temperature PTFE max 150¡æ, PTL max 300...

gb code gate valve
Specification: stander
Detail: Capability Criterion different type model have different specifications Norminal pressure 1.6 to 6.4 *** Seal Test 2.4 to 9.6 *** Working Temperature 0 to 200¡æ Suitable medium acetic acid . nitric a...


Showing 1 - 10 of 13, total 2 pages [First] [Previous] [Next] [Last]
1 2